At Comlectrics we exclusively use and recommend the C10 range of ADSL Filters and splitters. The newly released enhanced product range complies to the latest ETSI specification which included much tighter specifications for insertion loss, attenuation and return loss.  These products are now being used by Telstra as their preferred filters. See below the different types available and the different situations they suit.


Brochure Installation Guide

 ADSL Filter/Splitter - C10645E

The Model C10645 is a distributed filter for use with each item of Customer Equipment (CE) connected on a PSTN Line that has an overlay ADSL service. Its purpose is to attenuate the ADSL signal before reaching the PSTN connected CE.

ADSL Filter/Splitter - C10245E

The Model C10245(E) is a distributed Filter/Splitter for use with each item of Customer Equipment (CE) connected on a PSTN Line that has an overlay ADSL service. Its purpose is to attenuate the ADSL signal before reaching the PSTN connected CE.


Brochure


Brochure Installation Guide

ADSL Filter/Splitter - C10345E

The Model C10345 is a wall mount distributed filter/Splitter for use with each item of Customer Equipment (CE) connected on a PSTN Line that has an overlay ADSL service. Its purpose is to attenuate the ADSL signal before reaching the PSTN connected CE.
 

ADSL Filter/Splitter - C10100E
ADSL Filter/Splitter for centrally separating the ADSL signal and voice frequency signal. No distributed (inline) filters are required in this installation. Can be installed at the telephone line entry point to isolate all telephone sockets in a house.